Improvised Antenna for USB Modem & Extension USB Cable (Smartbro & Globe Tattoo

How to Extend your USB cable using Utp Cable

USB Cable

The USB cable provides four pathways- two power conductors and two twisted signal conductors. The USB device that uses full speed bandwidth devices must have a twisted pair D+ and D- conductors. The data is transferred through the D+ and D- connectors while Vbus and Gnd connectors provide power to the USB device.

USB Wiring connection

The USB cable has typically four wires to connect the A type connector

Red + 5V Pin 1

White D+ Pin 2

Green D- Pin 3

Black Gnd Pin 4

Step by Step Instructions:

1. Green wire from usb(D-) --> ilagay mo sa green wire ng utp.

2. White wire from usb(D+) -->ilagay mo sa white/green ng utp.

3. Red (+5V) from usb --> ilagay mo sa orange + white/orange ng utp.

4. lastly, Black(GND) --> ilagay mo sa brown + white/brown ng utp.

So ung excess na blue + white/blue either na cut mo na lang or gawin mong reserve.

or visit

*Only fully-registered users can see this link.* 

Quote:

NOTE: You should only make 8 meters and below of Utp cable to have the best result, tried and tested by Boss Natzki, Slayer Me, Myself and I. Use only 1.5 or 2 meters USB extension when you are using a laptop. It is not advisable to use in laptops when the USB extension cable exceeds 1.5 or 2 meters due to insufficient power supply. The laptop might not recognized the Tattoo Modem.. Good Luck!

Another clear instructions from sir slayerquest for those who did not make it work:

1. use 2.0 usb extension nabibili po sa CDR-KING and make sure testingin muna bago bumili para hindi kayo magkaproblema.

2. UTP CAT5 which is white color wire and UTP CAT6 yung blue color wire. Pwede rin ang utp wire ng smartbro cannopy (yung dina ginagamit)

3. TAKE NOTE: Approximately 8 meters ang kayang iextend ng utp cable.. for example 1 meter yung usb extension nio na gusto nyong dugtungan you will need 7 meters of utp wire which is equivalent to 8 meters.

4. For best results, use desktop computer, hindi po gagana sa laptop kasi hindi na kayang supplayan ng power ang extension niyo. 8 meters yung sakin, 1 meter usb extension and 7 meters CAT5 utp entension.

KUHA MO? 

__________________________________________________ __________________________________________________ __________________________________________________ ____

I already computed the focus of my Improvised Parabolic Dish to maximize its signal gain using this formula:

*Only fully-registered users can see this link.* 

My Improvised Antenna

__________________________________________________ __________________________________________________ __________________________________________________ ____

My Speedtest as of 6/23/2011

This image has been resized. Click this bar to view the full image. The original image is sized 1314x555.

Quote:

Here is my explanation why negative(-) value RSSI is better than positive(+) value RSSI. Basic Algebra -1 is greater than -2 +2 is greater than +1 Speaking of RSSI, mataas ang value nya kung negative na small number like -1 or when the number is closer to zero. For example, in Mathematics which is bigger? -1 or -2 ? my answer is -1. So, thats why the closer the value of RSSI to ZERO is an indication of good stable connection and signal strength.

Save Mother Earth

__________________________________________________ __________________________________________________ __________________________________________________ ____

Compilation of Improvised Antenna

NOTE: I really do believed that very long usb extension cables can greatly affects the transfer rate of the device because of high resistivity level. Kung gusto nyo ng Effective na usb extension, I suggest na yong 3 meters na usb extension from cdrking kasi hindi matakaw sa power.

Meron kasi ako dito 5 meters pero minsan 0.0kbps ang transfer data nya kung matagal ng naka connect at kung nag ddownload ako after 4 - 5 minutes naddc na cya.

Read More

Solution: blackberry curve 8520 app error 523

Q. How can I fix "app error 523" on my Blackberry curve?

Solution:
Update your Apps Software:
Download Desktok Manager 5.0.1 PC version


after installation, connect your Device to your PC then click Application Loader then Update


Q. My Blackberry is stock on loading pages:


Solution:
Install Download Desktok Manager 5.0.1 PC version 
go to: Program files\ common files \ research in motion \ apploader - Removed "Vendor.xml" 
then that is!

Read More

Airtel Hack 2009 for Unlimited Free SMS

Many people search for free Airtel message center number to start sending unlimited messages without paying for them. Well, previously many websites made posts on these free message center numbers, but after the frequent use of the number, Airtel capped or filtered those numbers from further use. But still there are few working message center numbers and here I am going to reveal that with you. Note that Airtel might ban this number anytime, so be fast in using this and send free sms to anyone from your Airtel mobile number.

How to send unlimited free SMS using free SMS center no hack

1. Navigate to Messages option on your mobile and click on Settings
2. Click on Message Center Number and proceed to add a new message center number.
3. In Message Center Name field, write anything. For an example, “Hungry Hacker”.
4. In the Message Center Number field, write +919810051905
5. Choose Preferred Connection Type as Packet Data
6. Save the message center and activate it from the options.

Now we have configured the message settings to send and receive all message through an another message center number. But since we have selected Packet data as connection type, we have to do some additional settings on our phone.

1. Go to your phone menu and navigate to Settings >> Phone Settings >> Connection >> Packet Data
2. In the settings of packet Data, edit the following options
3. Packet Data Connection >> When available and Access Point >> Airtel Live
4. Save all settings and you are done.

Note: Here we are using a CDMA message center number to send free messages from Airtel mobile. Since CDMA networks don’t support 91 as the country code, you have to add 0 before every number. This is very important and if you make mistake here, this trick will not work.

Example : Suppose you want to send free messages to 9861098610, now while composing the SMS, type this number as 09861098610 in stead of 919861098610 or +919861098610.

And also, message center number settings option may vary from phone to phone. The above steps are mentioned for Nokia mobile phones. If you want to try sending free SMS from any other handset, use your mobile manual and set the new message center number accordingly.

Read More

LG KU250 Unlock code by Cracked software

LG KU250 (compatible)





TOOLS:
Crack LG Unlocker 
Down Load Software Here!!
USB Cable LG KU311

PROCEDURE:
Open LG Qualcomm Exploiter (v4mpire-unlocker)
Connect phone in normal mode
Click SCAN INTERFACE
Select UNLOCK in Operation
Click DO JOB
Wait a sec. and unlocking DONE!!!

SCREEN SHOT:

All Supported Models:
KU990 
KU380 
KU250 
KU950 
KU970 
KU830 
KT615 
KT610 
KF700 
KF390 
KF311 
KF310 
KE990 
KC910 
CU920 
CU720 
HB620 
TU720 
U250 
U370 
U830 
U960 
U970 
U990

Read More

Use Your GPRS Cell Phone As A Modem

The most basic way of doing this is to use the disc that came with your phone. My Samsung came with software for loading music and files as well as changing the phone’s settings. Look around on your phone’s software. See if you can find anything about “˜Connections’, “˜Network’, “˜Modem’ or “˜Communications’. If you do, there should be detailed instructions on how to use your cell phone as a modem.

Sim Setting: (connection name: any name)

globe sim (zero cost)

apn: http.globe.com.ph

dial #: *99***1#

sun sim (load 1 pesos)

apn: minternet

dial #: *99#

autntcation: PAP

smart buddy sim (load atleast 2 pesos)

apn: internet

dial #: *99#

However, what if your phone didn’t come with a CD, or there was nothing on the CD about turning your cell phone into a modem?

First, connect your phone to your PC using the USB cable (if one didn’t come with the phone there are loads for sale on eBay for many different makes and models of phones for low prices). You can also connect it via Bluetooth, however this will cause the final download speeds to be slower. Your computer should recognize that your phone has been connected to it and begin to install the “˜Drivers‘. When this has finished, open the start menu and select “˜Connect To‘. At the bottom of the window which opens opt to “˜Create a new connection‘. Then select “˜Create a Dial-Up Connection‘.

The window shown below will be displayed. For the phone number enter in *99# (this is a kind of universal GPRS number that your carrier will redirect). This will tell your phone to access its GPRS function.

For the username and password you’ll have to do some research on the internet. These are easily found by simply Googling “˜GPRS Setting for [Network Name]“˜ or “˜Wap Settings for [Network Name]“˜. I am on a network called Meteor so we’ll use them as an example for this article.

Username: my

Password: WAP

One you have done this, finish creating the connection. Then, select the connection from the “˜Connect To‘ menu. When it asks for the username and password, enter in the ones appropriate for your network. This will then connect you to the internet.

Because mobile phone technology is at its height, you’ll get fast speeds, especially if you’re in the US. I had assumed that it would be slow like GPRS mobile internet it but this is only slow because of the phone’s browser’s limitations. Not the networks.

I easily checked e-mails, surfed the web and submitted work. Don’t get me wrong, you won’t exactly be streaming HD video but it can be handy when your normal internet goes down. I found that loading complex pages such as makeuseof.com took around 10-12 seconds where as simple pages such as my blog or Twitter only took a couple of seconds.

Read More

Hack Canopy Mac Address Cloning

USE THIS AT YOUR OWN RISK. I WILL NOT HELD RESPONSIBLE IF MAHULI KAYO NG MGA TELECOMS ONCE YOU FOLLOW THIS STEPS.

credit to: http://www.pinoyxtreme.com

Subscriber Module Cloning Procedure
You need two important things from Legal Subscriber for this to work properly
Subscriber Module - ESN

This image has been resized. Click this bar to view the full image. The original image is sized 800x453.

PC - MAC Address

2. Input the MAC here.

This image has been resized. Click this bar to view the full image. The original image is sized 1024x452.

Set your IP to auto assign please allow DHCP to assign your designated IP

RESTART THE SM. UNPLUG THE ADAPTER AND REPLUG IT AGAIN.

FROM CANOPY PAGE: SET THIS

WATCHDOG RESET: Configuration -> Security -> Allow IP Filter (Input this: 169.254.1.1 )
and Your Auto Asign IP)

Home -> Event -> Clear Event

This image has been resized. Click this bar to view the full image. The original image is sized 1021x571.

This image has been resized. Click this bar to view the full image. The original image is sized 800x448.

3. Input ESN here.

This image has been resized. Click this bar to view the full image. The original image is sized 725x627.

4. Rescan AP as many times as possible

This image has been resized. Click this bar to view the full image. The original image is sized 1002x568.

5. Success! You just clone a legal sub with no software attached.


***How you can get a working ESN and MAC? Of course from your friendly neighborhoods and must be a legal subs within the same Base Station***


Take it on your own risk!
FOR ADVANCE USER WITH KNOWLEDGE ON CNUT TOOLS (NOT FOR KIDS ON NETWORKING)

This image has been resized. Click this bar to view the full image. The original image is sized 712x441.

temporary set up of LAN (working in some areas only)

This image has been resized. Click this bar to view the full image. The original image is sized 1016x721.

detecting AP

This image has been resized. Click this bar to view the full image. The original image is sized 1024x768.

inputing the AP

This image has been resized. Click this bar to view the full image. The original image is sized 800x600.

refreshin SUB in the network

Sa mga di makapasok sa 169.254.1.1 kelangang mareset ang canopy. Gumamit kayo ng rj12 sampung piso lang po yan.

Or [Only Registered Users Can See LinksClick Here To Register]

This is rj12 6pins


Kelangan lang mag clone ng ESN at MAC address ng Legal Subrcriber para Free INTERNET na ulit.

Saan Makakakuha ng ESN at MAC adress ng Legal Subscriber.
1. Sa kapitbahay or kaibigan or kakilala na naka Legal.
2. Sa Base Station o Cellsite na malapit sa inyo. Makikita dun ang mga ESN at Mac adress ng mga Legal Subscriber.

Paano i-hack ang Base Station.
1. gumamit ng software na WIRESHARK
Punta lang kayo dito: [Only Registered Users Can See LinksClick Here To Register]
at i download nyo ang software na yan para mahack ang Base Station. ma trace mo ang Ip ng Base Station ng makita ang mga esn at mac ng legal subscriber na iclone.

Kelangan ding alam nyo ang color code ng i clone nyo na esn at mac adress ng legal subrcriber.
Halimbawa:
Kung sa ap evaluation nyo ay may nadetech na 3 color code.
Example: 64, 65, 66
Halimbawa ang color code ng naclone nyo ay 64, ibang color code ang gamitin nyo, 65 or 66 ang gagamitin nyo, basta na detech sa ap evalution, magkakalapit lang naman yan. Yang ang tricks na nakakalimutan nilang gawin. At saka direct connection ka na. Walang conflict sa na clone mo sa Legal Subscriber, dahil parang new connection ang dating mo dyan. Kumbaga Unknown ka sa kanila. Dahil wala ka namang name dyan, di katulad ng Legal.

Once na ma clöne mo na ang ESN at MAC Adress ng Legal Subrcriber. Ang setting sa Lancard ay naka Auto Assign na. Hindi naka Manual Setting na katulad ng dating tricks.
Credits to:
bloodbrother of SB
Attached files:
[Only Registered Users Can See LinksClick Here To Register]
[Only Registered Users Can See LinksClick Here To Register]
[Only Registered Users Can See LinksClick Here To Register]

Read More